Wind Turbine Generator Kit Pikasola 400W 24V with 5 Blade, Wind Generator Kit with Charge Controller, Wind Power Generator for Marine, RV, Home, Windmill Generator Suit for Hybrid Solar Wind System, Wind generator Blade adopt reinforced fiber nylon which more durable and strong ability of Anti-wind. With an optimized aerodynamic shape and structural design, has a High wind energy utilization.
(as of – Details)
Wind Turbine Generator Kit Pikasola 400W
- Feature: Starting with 2.5m/s Low wind speed; Low vibration during working; High wind energy efficiency. Wind turbine kit suitable for boat, RV, cabin, home, etc.
- Wind Blade: 23.8 inches in length, the longer blade will generate more power. The blades are made of Nylon carbon fiber which is special in waterproof, corrosion resistant, and lightweight.
- Wind Generator: Three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high-performance NdFeB permanent magnet.
- Rotating Aluminum Alloy Body: With a yaw adjustment system, the wind direction position is automatically read and the rotor position is adjusted to capture the maximum wind energy. The tail fin is designed according to the aerodynamic principle.
- Real Parameter, Not False: Our product parameters are Real & Actual, not False. Based on design after repeated experimental testing. Pls, remember to contact us if you have any questions after receiving the wind turbine. We should take charge of our product.
Wind Turbine Generator Kit Feature:
- Wind Turbines start with low speed; high wind energy utilization; beautiful appearance; low vibration in an operation.
- Wind generator Blades adopt reinforced fiber nylon which is the more durable and strong ability of Anti-wind. With an optimized aerodynamic shape and structural design, has a High wind energy utilization.
- Our wind turbine adopts a patented permanent magnet rotor alternator, with a special kind of stator design, which decreases the resistance torque of the generators efficiently.
- Being installed by human design and easy for installation, maintenance, and repair.
- Rated power: 400 W
- Maximum power: 410 W
- Number of blades: 5
- Rated voltage: 24V
- Start-up wind speed: 2.5 m/s
- Rated wind speed: 13 m/s
- Working speed: 3-25 m/s
- Survival wind speed: 40 m/s
- Blade Material: Nylon Fiber
- Generator Type: 3-Phase AC Permanent Magnet Generator
- Braking Method: Electromagnetic
- Wind Direction Adjustment: Automatically Adjust The Windward Angle
- Operating Temperature: -40 ~ 80 ℃
- Magnetic Material: Neodymium Iron Boron
- Cabin Material: Die Casting Aluminum Alloy
- Three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high-performance NdFeB permanent magnet.
- An intelligent wind charge controller can shut down auto when the battery is fully charged. Which can adjust current and voltage effectively.
- The unique magnetic circuit design makes the starting torque very small, which can effectively ensure the wind turbine’s breeze starting ability.
- The wind turbine is made entirely of high-quality aluminum and stainless steel fittings. It is not only lightweight, small in size, but also compact in shape.
- The blade material is made of high-strength plastic with 30% carbon fiber and anti-UV anti-corrosion material, which is both beautiful and durable.
- The surface of the wind turbine is coated with a special process that provides excellent resistance to oxidation and corrosion under harsh conditions, as well as excellent corrosion resistance, water resistance, and sand resistance.
- Take out the wind turbine, put the wind turbine on the tower and align it with the flange hole. Mount the four flat gaskets on the four bolts, then insert the bolts into the holes corresponding to the flange. Tightening the screws with a hex key.
- The three wires of the wind turbine are connected to the transmission cable, each pair of wires is not less than 30 mm, and the tape at the connection end is at 100 mm.
- Connect the wind turbine’s cable to the controller and the battery must be connected to the controller before wiring.
- Wind Turbine x 1
- Blades x 5
- Controller x 1
- Nose Cone x 1
- Set Screws and Nuts x 1
- Installation Notes x 1
- Anemometer x 1（no battery）
- Note: Without tower tube
- (We recommend: steel pipes or iron pipes, diameter:50±2mm)
- For Home Use
- For Monitoring Use
- For Boat / Marine Use
- For Wind Solar
- Hybrid Streetlight Use And More